High Performance Middle Mooney Viscosity Fluoroelastomer FKM Copolymer for Rubber Seal

• Raw Material: Synthetic Rubber
• Material: Fluoroelastomer
• Appearance: White or Light-Yellow Film
• Form: The Massive Raw Rubber
• Features: Middle Mooney Viscosity
• Application: Injection Molding O-Rings, Gaskets, Seals, Sheets
• Model NO.: 26502/26602/26702/26703/26802/26902
• Forms: White or Light-Yellow Flake
• Fluorine Content: 66
• Package: 5kg/Bag, 800kg/Pallet
• Transport Package: 5kg/Bag
• Trademark: Flurine
• Origin: China
• HS Code: 3904690000
• Production Capacity: 3000tons/Year

Product Description

 

Product Description

 

Flurine® 26502, 26602, 26702, 26703, 26802 and 26902

Flurine® 26502,26602,26702,26703,26802 and 26902 are middle Mooney Fluoroelastomer, which is comprised of vinylidene fluoride (VF₂) and hexafluoropropylene (HFP), frequently used in many industries including automotive, fluid power, appliance and chemical industries. They have good ductility and be excellent resistant to oils, fuels, aliphatic series, aromatic hydrocarbons, lubricants, and most mineral acids.
 

 

Data Sheet

General
Features	Middle Mooney viscosity
Uses	Shaft seals, gaskets, molded tubing,oil seals, diaphragm, sheets
Forms	White or light-yellow flake
Items	Typical Value							Test Method
	26502	26602	26702	26703		26802	26902
Physical Properties
Fluorine Content(mass%)	66
Density(g/cc)	1.81~1.83							ASTM D297
Mooney Viscosity	50~59	60~69	70~79	65~85		80~99	90~110	ASTM D1646 ML 1+10 at 121°C
Water content	0.15							ASTM D 5668
Solubility	Soluble in lower ketones and esters
Vulcanization Properties
T10(s)	<120	<115	<110	<160		<105	<100	ASTM D5289
T90(s)	<230	<220	<210	<270		<200	<190	ASTM D5289
Mechanical Properties
Tensile strength(MPa)	14.0	14.2	14.5	13.5		14.5	15.0	ASTM D412 Method A
100% Modulus	5.2	5.3	5.5	5.6		6.0	6.2	ASTM D412 Method A
Elongation at Break(%)	190	185	180	170		165	160	ASTM D412 Method A
Tearing Strength(KN/m)	20	20	21	20		22	23	ASTM D624
Hardness, Shore A	76	76	76	78		77	77	ASTM D2240, Type A
Compression Set	18	18	17	20		17	17	ASTM D395, Test B 70 hours at 200ºC
Air-oven aging								ISO 188 After Dry Heat Aging;70 hours at 230ºC
Tensile strength change rate(%)	+5	+4	+3	+6		+1	+1	ASTM D412 Method A
Elongation at Break change rate(%)	-6	-5	-5	-3		-3	-3	ASTM D412 Method A
Hardness change, Shore A	0	0	0	0		0	0	ASTM D2240, Type A
Thermal Properties
Glass Transition Temp, Tg(ºC)	-20							ASTM D1329
Brittleness Temperature(ºC)	-30							ASTM D2137
Chemical resistance Properties
Resistance to liquids								3 # standard oil
Volume change rate(%)	+2	+2	+2	+2		+1	+1	ASTM D471 72 hours at 150ºC
Mass change rate(%)	+1	+1	+1	+1		+1	+1	ASTM D471 72 hours at 150ºC
Formulation					Curing condition
Polymer            100      MT carbon black,N990   30 Calcium hydroxide    6        Magnesium oxide         3 Fluorocure-5#        2.5					Press				Oven
					6min at 177°C				24h at 230°C

 

Packing & Storage

• Process safety instructions

1. Store and use all fluoroelastomers only in a well-ventilated area.
2. Do not smoke in areas contaminated with dust from fluoroelastomers.
3. Avoid eye contact. After handling fluoroelastomers wash any skin that came in contact with the product with soap and water.
4. Potential hazards, including evolution of toxic vapors, exist during compounding or processing under high temperatures.
5. Before processing the fluoroelastomers, read and consult the MSDS, and follow all label directions and operation cautions.

• Packaging and storage

FKM is packed in a plastic bag and then be put into a PVC bag with the net weight 25KGS. It must be stored in clean, cool, dry place.It must be stored in a clean, cool, and dry place. The storage life is one year from the date of production. It must be re-inspected if over one year and only can use if qualified.
It is transported as non-dangerous chemicals. Avoid excessive vibration and far away from pollution, sunshine and water during the transport.

 

Product Applications

 

Company Profile

 

FLURINE is a technological enterprise established in 2007 that integrates R&D, production and sales of PVDF and FKM raw materials.

We have a first-class core technology research and development team. After more than ten years of painstaking research, it has continuously expanded its product application fields, covering lithium batteries, films, cables, chemical materials and other industries.

We owns a multi-channel, multi-level R&D team of new materials, adhere to the combination of research and development and the introduction of advanced technology at home and abroad. We upgrade our products through technological innovation and change the existing product mix to meet the widest range of market needs.

Adhering to the people-oriented business philosophy, we also pay attention to the harmonious coexistence between man and nature, and are committed to creating a win-win world between man and nature. 

Certificates